What to do if my Vision TC2-AMP3 Amplifier has no sound?
If your Vision Amplifier has no sound, first, turn it off and check all connections. Also, verify the output level from your sources, such as checking the volume on your laptop. If the amplifier chip has temperature and overload protection, it may temporarily mute itself; it will resume working when normal conditions return.
Why is sound only coming out of one side of my Vision Amplifier?
If sound is only coming from one side of your Vision Amplifier, turn it off and switch the output connections. Also, switch the input connections and check the input cabling.
What to do if Vision TC2-AMP3 Amplifier has no power light?
If the power light on your Vision Amplifier is not on, check the power connections.
Power| power output | 2 x 20 watts RMS @ 8 Ω |
|---|---|
| power consumption | ≤40w |
| power supply | 100-240vAC 50/60Hz Max 1.2A, DC Output 12V 4A |
Audio| total harmonic distortion | ≤1% (20Hz-22kHz) |
|---|---|
| frequency response (line in) | 20Hz~22kHz(±2dB) |
| signal to noise ratio (line in) | ≥98dB (A-weighted) |
Physical Characteristics| dimensions | 71 x 42 x 40mm |
|---|---|
| weight | 63 grams |
| colour | White |
To Next Page
