What to do if Vision TC3-AMP has no sound?
If your Vision Amplifier has no sound, first turn it off and check all connections. Also, check the output level from the source, such as the volume on your laptop. If the amplifier chip's temperature is too extreme (outside -40ºC-50ºC) or overloaded, it will temporarily mute itself. It will resume working when normal conditions return.
Why is my Vision TC3-AMP Amplifier distorted?
If you are experiencing distortion with your Vision Amplifier, the volume may be too high; try reducing it. Alternatively, the loudspeakers may be worn or damaged, in which case you should replace or repair them.
What to do if Vision Amplifier sound only coming out one side?
If sound is only coming from one side of your Vision Amplifier, turn it off and switch the output connections. If the side changes, the amplifier is likely okay. Also, switch the input connections and check the input cabling.
How to fix Vision TC3-AMP with no power light?
If the power light is not on for your Vision Amplifier, check the power connections.
To Next Page
General
