VISIONEER
®
ROADWARRIOR
TM
SERIES MOBILE SCANNERS
12 SCANNER USER’S GUIDE
3. Remove any shipping tape from the scanner body.
SAFETY LOCK
Your scanner may have a slot for installing a Kensington® style safety lock. This slot can be identified by the lock
icon. When following the instructions in this document, make sure you connect the USB cable into the USB port
which is identified by the USB symbol.
A lock is not provided with the scanner and this document does not contain instructions on purchasing and
installing a safety lock. If you choose to use a safety lock, please carefully read the installation instructions
provided with the lock. More information about Kensington® locks can be found at www.kensington.com.
Use this slot to install a
safety lock. Do not
attempt to insert any
other type of object.
Use this slot to connect the provided micro USB
cable to the scanner. Do not use any other type
of USB cable. Do not attempt to install a safety
lock in this port.
To Next Page
Loading...
Need help?
General