Issue No: M Page: iii
Ref: FOCL-ASUM-8xxx Copyright © 2017 Vislink plc
Useful Part numbers – Change OCP5 Reference
Added GV Data cable information
SAR safety recommendations added
Ikegami information added
‘Scan’ mode information added
8.1 LDK Part Number updated.
Updated the document template and layout - non -technical changes.
‘Send All’ information added.
Ethernet connection between IDU to IDU information added.
Grass Valley ‘one to one’ information added.
Data connection changed from 5pin to 3pin XLR.
Included information for Sony PXW-X320 camera
Included Hitachi “send-all” information
Added Section 1.6 Emissions for FCC compliance.
Included Sony HDC-1700 Camera information.
Included Ikegami HDK-97C Camera & OCP-100 Controller information.
Sony ‘Auto RCP Off’ Information added.
Grass Valley Cable added.
Included Sony HDC-4300 Camera information.
Included FC/UPC model variant.
Updated System Configuration image.
Included Panasonic PTZ information.
Updated Grass Valley information.
Included Sony Scene File recall information.
Included Sony PDW-700 Camera information
Updated Grass Valley ‘Multiplexing’ information
Updated Panasonic PTZ Return Data information
Updated Ethernet connection information
Included ‘Transparent Mode’ information
Included L1700 Data Rx information
Included Grass Valley RS422 Multiplexing cable
Included G Valley OCP400 Multiplex cable and defined the Non-Multiplex cable in
Table 7-2.
Corrected Section 3.4 to update the software menu list
To Next Page
Loading...
Need help?
General
