7
protection first.
z Never insert any other object which is not a SD/MMC card into
the video camera’s SD card slot. Doing so will cerate the risk of
damaging to the camera and the card.
z Never remove the SD card from the video camera while the
video camera is powered on. Doing so can cause failure to the
picture recording operation, and even damage the memory
card.
2.3 Format the memory card
All data will be deleted including protected files. Be sure to download
important files to your computer before formatting.
1: Turn the power on, and set the video camera to the Setup Menu.
2: Press the UP or DOWN button to select [Format.] then press the OK
or RIGHT button to launch the submenu.
3: Press the UP or DOWN button to select the item [YES] and then press
the OK button to erase all data.
To Next Page
Loading...
