VistaQuest DV500 - Setting the Date and Time; 3 Using this Video Camera; Turn on; off the Camera

8
2.4 Setting the date and time
1: Turn the power on, and set the video
camera to the Setup Menu.
2: Press the UP or DOWN button to select
[Date&Time] then press the OK or
RIGHT button to launch the submenu.
3: Press the UP or DOWN button to change the highlighted value. Press
the LEFT or RIGHT button to move the cursor between settings.
4: Press the OK button to confirm the setting.
5: Press the MENU button to close the menu.
3. Using this video camera
3.1 Turn on / off the video camera
1: Open the LCD panel.
2: Press the power button to turn on / off the camera.