PAGE 11
INSTA L L ING THE SPA COVER
1 . Position the cover squarely over the spa.
2 . Position the locks for the tie-downs on the sides of the spa. You should allow approximately 1/2” to 3/4 ”
slack in the straps for ease of insertion into the locks and to allow for material shrinkage during
temperature changes.
3 . Using the screws provided, attach the locks and insert the cover tie-down straps. Utilizing the cover
a n ytime the spa is not in use will reduce heat loss and thereby reduce the amount of running time
required to make up that loss by the heating system.
Keep cover fastened down at all times when not in use.
DA NGER - RISK OF INJURY
To reduce the risk of potential injury:
1 . Never leave a spa uncovered or unatte n d e d .
2 . Never leave a spa cover unlocked.
3 . Do not stand, sit, or lie on the cover.
A LWAYS RE M O VE SNOW FROM THE COVER. THE COVER HAS NOT BE E N
D ES I G NED TO SUSPE ND THE WEIGHT OF WET SNOW.
C O V E R INSTA L LAT ION
Ke y
C o v e r
Tie Down
S t ra p
Lo c k
S c r e ws (2)
To Next Page
Loading...
Need help?
General
