PAGE 18
(D) TURBO JET
The Turbo Whirlpool Jet is not individually
adjustable. To adjust the flow, you must open or
close air control valve.
The Turbo Whirlpool Jet utilizes a high flow design
to create a powerful whirlpool current throughout
the spa. It's great for working out the hard to relieve
knot. For cleaning purposes, the Turbo Jet face can
be removed by turning the face counter clockwise.
Re-install by pushing the face in and turning
c l o c k w i s e .
(E) THRE E — WAY POWER DIVERTER
VA LV E
This valve is functional when the primary or
s e c o n d a r y, two-speed pumps are operating. Wa t e r
may be diverted to two individual sections of jets
or a combined operation of both sections.
Do not adjust when pump is set at high speed.
For the operation of a specific spa, review the
f o l l o w i n g :
(G) MIDI DIRECTION & MIDI SWIRL
(TENSION EAS E ™ )
Creates a powerful massaging action that
penetrates deep into your upper back, neck and
shoulders—the areas most commonly afflicted by
tension. Adjust the pressure to your own comfort
l e v e l .
(F) CLU S TER JET
These jets work as a team, that’s why they’re
usually found in groups of two or more. They can
deliver vigorous pinpoint action for a therapeutic
effect, or you can turn into soothing massage
with just a twist of your finger.
To Next Page
Loading...
Need help?
General
