PAGE 17
(A) SELEC T — A — S W IRL™ JETS
The water flow direction is adjustable by rotating
the directional jet nozzle. The amount of pressure
can be adjusted by rotating the outer rim of
the jet(s) clockwise for minimum pressure and
counter–clockwise for maximum pressure.
Pressure may also be varied by the use of the
air control.
This jet can be removed for cleaning by turning the
outer ring counter–clockwise until you feel it stop.
Then slightly apply pressure in the same direction
to overcome the “stop”. The jet can then be pulled
out of the jet body for cleaning. To install the jet,
i n s e rt the jet back into the body and turn clockwise.
(B) PULSATOR JETS
Interchangeable with SELEC T– A – S W IRL™ and
Q UAD ST REAM™ jets. Water pressure can be
adjusted by rotating the outer rim of the jet(s)
clockwise for minimum pressure and
counter–clockwise for maximum pressure.
Pressure may also be varied by the use of the air
c o n t r o l .
This jet can be removed for cleaning by turning the
outer ring counter–clockwise until you feel it stop.
Then slightly apply pressure in the same direction
to overcome the “stop” . The jet can then be pulled
out of the jet body for cleaning. To install the jet,
i n s e rt the jet back into the body and turn clockwise.
JET OPERAT ION
Your Vita Spa is designed with a unique jet system to allow you to select a wide variety of massage patterns.
The following is a description of the various types of jets and their operation you may use to tailor your spa
to your specific massage needs.
(C) QUAD STREAM™
Interchangeable with SELECT—A—SWIRL™ and
PULSATOR JETS. It is one powerful jet, whose
force, redirected into four different directions,
results in strong, even vibrations to soothe those
overworked calf muscles.
To Next Page
Loading...
Need help?
General
