Vivax ACP-12PT35AEF User Manual

VIVAX ENG
38
The exhaust hose can be installed into the wall
(Not applicable to the units without adaptor A, expansion plugs and wooden
screws of Accessories).
Prepare a hole in the wall. Install the wall Exhaust adaptor A onto the wall
(outside) by using 4 expansion plugs and wooden screws, be sure to fix
thoroughly. (See Fig.18)
Attach the Exhaust hose to wall Exhaust adaptor A.
Note: Cover the hole using the adaptor cap when not in use.
The exhaust hose can be compressed or extended moderately according to
the installation requirement, but it is desirable to keep the hose length to a
minimum.
IMPORTANT:
DO NOT OVER BEND THE EXHAUST HOSE (SEE Fig.19)
CAUTION:
Make sure that there is no obstacle around the air outlet of the exhaust hose
(in the range of 500mm) in order to the exhaust system works properly.
Fig.18
Expansion plug
position
Adaptor cap
Adaptor A
Adaptor cap
Fig.19

Vivax ACP-12PT35AEF Specifications

General

Type	Monobloc mobile air conditioner
Noise level	65 dB
Refrigerating medium	R410A
Dehumidifier function	Yes
Cooling capacity (max)	- BTU/h
Dehumidifying capacity	1.2 l/h
Air conditioner functions	Cooling
Heating capacity in watts (max)	- W
Cooling capacity in watts (nominal)	3500 W
Heating capacity in watts (nominal)	0 W
Cooling energy efficiency (EER, W/W)	2.61
Heating energy efficiency (COP, W/W)	0
Energy efficiency scale	A+++ to D
Power consumption (cooling)	1350 W
Energy efficiency class (heating)	A
Hourly energy consumption (cooling)	1.4 kWh
Hourly energy consumption (heating)	- kWh
Product color	White

Weight and Dimensions

Depth	- mm
Weight	- g