How to troubleshoot no sound or picture on Vivax TV-32LE80T2S2 LED TV?
If your Vivax LED TV shows no sound or picture, first ensure the power cord is securely plugged into a working AC outlet. Then, check that the power switch on the bottom right edge of the front panel is turned on. Finally, press the POWER button on the remote to take the unit out of Standby mode and check if the LED light is red or blue, indicating power is on.
Why is there sound but no picture on my Vivax TV-32LE80T2S2?
If your Vivax LED TV has sound but no picture, or the picture is in black and white, try these steps. First, unplug the TV from the AC outlet and plug it back in after 60 seconds. If that doesn't work, check that the Colour setting is set to 50 or higher. You might also want to try different TV channels.
What to do if external source has no picture and/or sound on Vivax LED TV?
If you've connected an external source to your Vivax LED TV but aren't getting any picture or sound, start by checking the output connection on the external source and the input connection on the TV to ensure they are correctly matched. Also, make sure you've selected the correct input mode on your TV for the incoming signal.
Why is the sound and picture distorted on my Vivax LED TV?
If the sound and picture on your Vivax LED TV are distorted or wavy, it may be due to interference from another electrical appliance. Try turning off nearby appliances; if the interference stops, move the appliance further away from the TV. If that doesn't work, try plugging the TV into a different power outlet.
How to fix a Vivax TV-32LE80T2S2 remote control that is not working?
If the remote control for your Vivax LED TV isn't working, first confirm that the TV still has power and is operational. Then, try changing the batteries in the remote control, making sure they are correctly installed.
Why is there horizontal stripe on picture of my Vivax TV-32LE80T2S2?
If you see horizontal or vertical stripes on the picture, or if the picture is shaking on your Vivax LED TV, check for any nearby sources of interference, such as an appliance or electric tool.
How to restore sound on Vivax TV-32LE80T2S2 when there is picture but no sound?
If you have picture but no sound on your Vivax LED TV, check the volume settings to ensure they are not set too low. Also, verify that Mute mode is not turned on.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LED |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Built-in Tuner | Yes |
| Resolution | 1366 x 768 |
| Tuner Type | DVB-T2 |
Importance of following all safety and operation instructions.
Warning against placing the TV in unstable locations to prevent injury.
Specifies placement guidelines for the TV for optimal viewing and ventilation.
Instructions for attaching the TV stand securely.
Guidelines and specifications for mounting the TV on a wall.
Connecting aerials or satellite dishes for TV reception.
Connecting satellite dish (LNB) for TV signals.
Connecting external devices via HDMI for digital audio/video.
Connecting USB storage devices for media playback/updates.
Detailed explanation of each button on the remote control.
Guide to connecting TV signal sources.
Detailed instructions for HDMI and Component connections.
How to turn the TV on/off, select sources, and adjust volume.
Managing channels, including tuning and scanning.
Browsing and managing media files from USB devices.
Solutions for common TV operational problems and errors.
To Next Page
