VIVAX ENG
14
Control Panel
Antenna and Power Connection
1. Connect the antenna cable into the TV antenna input terminal at the rear
panel and wall antenna socket.
2. Connect the Power plug into the wall outlet.
Powe
Turn the TV on or enter into
standby mode.
INPUT Signal source selection
button.
MENU Enter / Exit the main menu.
CH ▼ Channel decreasing short
cut key; decrease the
channel No. and select the
last option in the menu.
CH ▲ Channel increasing short cut
key; increase the channel
No. and select the next
option in the menu.
VOL- Volume decreasing short cut
key; enter into the next
menu and adjust OSD
options (decreasing).
VOL + Volume increasing short cut
key; enter into the next
menu and adjust OSD
options(increasing).
55“ 65“
To Next Page
Loading...
Need help?
General
