Vivax TV-55UHD122T2S2SM User Manual

ENG VIVAX
33
DNR (Dinamic Noise Reduction)
To filter out and reduces the image noise and improve picture quality.
Press ▼ / ▲ button to select DNR, then press ► or OK button to enter sub-
menu.
You can choose:
Off Select to turn off video noise detection.
Low Detect and reduce low video noise.
Middle Detect and reduce moderate video noise.

High Detect and reduce enhanced video noise.
Auto Noise reduction is atomatically controlled by the system.
Aspect Ratio
To choose picture format.
Press ▼ / ▲ button to select Aspect Ratio option, then press ► or OK button to
enter sub-menu. You can choose: Auto, 16:9, 14:9 4:3, Zoom1, Zoom2,
Panorama and Movie.
SOUND SETUP
1. Press MENU button to display the
main menu.
2. Press ▼ / ▲ button to select SOUND
SETUP in the main menu and press
OK.
3. Press ▼ / ▲ button to select the
option that you want to adjust in the
SOUND menu.
4. Press OK button to adjust.
5. After finishing your adjustment, Press
MENU button to save and return to
the previous menu or press EXIT
button to enter into normal TV mode.

Sound Mode
Press ▼ / ▲ button to select Sound
Mode, then press OK button to enter sub-
menu.
Press ▼ / ▲ button to select.
Select preset Sound mode: Standard,
Movie, Music or User.
You can change the value of Treble and Bass when the sound is in User mode.
TIPS: You can press Sound button on the remote control to change the Sound Mode
directly.

Vivax TV-55UHD122T2S2SM Specifications

General

Comb filter	3D
Screen shape	Flat
Display diagonal	55 \
Display brightness	270 cd/m²
Display technology	LED
Native aspect ratio	16:9
Contrast ratio (typical)	4000:1
Display number of colors	1.073 billion colors
Display diagonal (metric)	140 cm
Motion interpolation technology	CME (Clear Motion Engine) 400Hz
Video apps	YouTube
Operating system installed	Android
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL, SECAM
Digital signal format system	DVB-C, DVB-S2, DVB-T2
Sound modes	Movie, Music, Standard
Audio decoders	Dolby Digital
RMS rated power	20 W
Number of speakers	2
Product color	Black
Rollable display	No
Panel mounting interface	200 x 200 mm
Firmware upgradeable via	USB
Noise reduction	-
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10)
Annual energy consumption	145 kWh
AC input voltage	180 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	99 W
Composite video in	1
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0

Weight and Dimensions

Depth (with stand)	284 mm
Width (with stand)	1242 mm
Height (with stand)	788 mm
Weight (with stand)	11200 g
Depth (without stand)	81 mm
Height (without stand)	728 mm