Need help?Do you have a question about the Vivitar 202 and is the answer not in the manual?
Power| power sources | 4 AA 1.5v Alkaline batteries |
|---|---|
| flashes per set of batteries | 400 |
| recycle time | 4 seconds |
Flash Specifications| flash guide number ASA-feet | 30 to 170 |
|---|---|
| flash duration manual | 1/1000 second |
| color temperature | 6000 Kelvin |
Weight and Dimensions| weight with batteries | 257 gr |
|---|---|
| dimensions | 35mm x 67mm x 79mm |
| automatic operating range | 0.9m to 3.4m |
Cover for accessing the battery compartment.
Dial used for setting ASA/DIN film speed and f-stops.
Indicates flash readiness and allows manual firing.
Controls the power state of the flash unit.
Cable for synchronizing flash with camera without a hot shoe.
Component for attaching the flash to a camera's accessory shoe.
Port for connecting the PC synch cord.
Switch to select between automatic and manual flash modes.
Detects ambient light for automatic exposure control.
Procedure to rebuild or reform the capacitor by repeatedly firing the flash.
Guide on attaching the flash to a camera's accessory shoe or hot shoe.
To Next Page
