Powering ON/OFF Your Digital Camcorder
Make sure the batteries have been inserted properly into your digital camera.
Make sure the Class 4 SD Memory card has been installed properly into your camcorder.
SDHC Class 4 card up to 32GB - SD Card not included.
POWERING THE CAMCORDER ON
Flip open the LCD display panel. Press the Power button to turn your camcorder ON.
The camcorder will be in Video Capture Mode to start.
POWERING THE CAMCORDER OFF
While the camcorder is on, you can press the Power button again at any point to turn your
camcorder OFF. You will see a “Goodbye” splash screen and then the camcorder will power off
completely.
Alternatively, you can press the HOME button and then tap the Power Off icon. Tap ‘YES’ to
select to power off the digital camcorder or ‘NO’ to return to the Home Main Menu Screen and continue
using your camcorder.
AUTO POWER OFF – POWER SAVING
Your digital camcorder also has an Auto Power Off feature that automatically turns off your camcorder
after a specific period of time that your camcorder is left idle. The Auto Power Off time can be set from
the Setup/Auto Off menu settings.
To Next Page
Loading...
