2. Push the OK joystick button Right for the Date Stamp options submenu to
appear:
On, Off
3. Push the OK joystick button Up/Down to highlight and select the Date Stamp
option you desire.
4. Press the OK button to confirm and save your choice.
5. Press the Menu button to exit the menu and revert back to the Camera capture
mode.
6. If enabled, the icon for the Date Stamp choice appears on the right side of the
LCD.
Self Timer
This feature allows you to set up the camera so that you can also be included in the
shot. It is best to use a tripod or place the camera on a flat and sturdy surface.
1. Push the OK joystick button Up/Down to select the Self Timer mode.
To Next Page
Loading...
