2. Push the OK joystick button Right for the Self Timer options submenu to appear:
Disable, 10SEC, 20SEC
3. Push the OK joystick button Up/Down to highlight and select the Self Timer
option you desire.
4. Press the OK button to confirm and save your choice.
5. Press the Menu button to exit the menu and revert back to the Camera capture
mode.
6. If enabled, the icon for the Self Timer choice appears on the right side of the
LCD.
7. Press the Shutter button to start the self timer countdown. The big blue
countdown digit will appear in the center of the LCD and the camera emits a
beep for each second until the image is captured.
Note: The Self Timer needs to be reset for each photo taken using this feature.
Self-Timer shortcut feature
To Next Page
Loading...
