1. In the Camera capture mode, push the OK joystick button Left.
2. The Self-Timer icon will appear on the right of the LCD below the battery
icon.
3. Push the OK joystick button Left until you see the Self-Timer option you
wish to use appear:
10 Sec, 20 Sec
4. Press the Camera Capture button.
5. The camera emits loud beeps until the photo is captured.
6. After the selected time delay the photo will be taken.
Burst Snapshot
This feature allows you to set up the camera to take 3 continuous images as you
move the camera.
1. Push the OK joystick button Up/Down to select the Burst Snapshot mode.
2. Push the OK joystick button Right for the Burst Snapshot options submenu to
appear:
Single, Burst
To Next Page
Loading...
