Vivitar VM175BT - User Manual

Vivitar® VM175BT
Bluetooth® Speaker
User Guide
Thank you for purchasing the Vivitar® VM175BT
Bluetooth® Speaker.
Introducon
With this speaker, you will enjoy listening to high quality
music wirelessly using Bluetooth® technology. Easily
connect to any mobile device for both conversaon and
music listening. It also pairs with other Bluetooth-en-
abled devices (Bluetooth V4.1+EDR specificaon and
HSP, HFP, A2DP and AVRCP profiles).
Specificaons
• Bluetooth Specificaon: V4.1+EDR
• Operaon Frequency: 2.402-2.48GHz
• Supported Profile: HSP, HFP, A2DP, AVRCP
• Operaon Range: Up to 33 feet(10 meters)
• Talk Time: 4 hours
• Play Time: 2 hours
• Standby Time: 10 hours
• Baery Type: 400mAh, 3.7V, Polymer Lithium Ion
Baery
• Charge Time: 2 Hours
Important!
Ensure that the baery is fully charged if the speaker is
not used for a long period of me. To avoid a complete
discharge of the baery, charge the speaker at least
every six(6) months.
Baery Notes
• A fully charged baery provides up to four(4) hours of
talk-me, two(2) hours music playback, and up to
ten(10) hours of standby me. Talk and standby mes
vary depending on mobile phones or other
compable Bluetooth® devices, sengs, styles, etc.
• When the baery power is low, the speaker will beep
every 30 seconds.
• When using with your iPhone, an addional baery
meter feature will display the remaining baery on
your phone’s touch screen.
Pairing with your Phone
1. Place the speaker in close range of a Bluetooth®-en-
abled mobile phone.
2. Press and hold POWER buon for three(3) seconds.
Unl indicator lights flash blue and red.
3. Set your mobile phone to pairing mode (as explained
in operang instrucons for your phone) and search
for Bluetooth® devices.
First Time Use
Charging the Baery
The VM175BT Speaker has a built-in, rechargeable
lithium-polymer baery. To avoid damage, do not
aempt to remove the baery. The full performance of
the baery is achieved aer two or three charging-dis-
charging cycles. Charge the baery fully before first use.
1. Connect the USB cable to the speaker.
2. Connect to the correct outlet (wall, computer, car
charger).
3. When the charger is connected to the speaker, the red
indicator light will turn on.
Note: Charging the baery fully may take up to 2 hours.
4. When the baery is fully charged, the red indicator
light will turn off. Disconnect the charger from the
speaker and the outlet. The speaker is ready for use.
Note: Overcharging could reduce the life of the baery. A
charged baery will lose its capacity if it is not used
on a regular basis.
In the Box
• VM175BT Bluetooth® Speaker
• USB Charging Cable
• AUX Cable
• User Manual
Safety Precauons
• Please read this User Manual carefully and follow all
instrucons.
• To avoid damage or malfuncon of the speaker do not
drop it from high locaons and/or on to hard surfaces,
do not place heavy objects on it.
• Keep speaker away from humidity, water and other
liquids. If it does get wet, do not operate as this may
cause an electrical shock, explosion and damage to the
device or to the user.
• Do not place or keep this product near heat sources,
such as direct sunlight, radiators, stoves or any other
apparatus that produces heat. This may cause an
explosion, degrade the performance and/or reduce
baery life.
• Do not modify, repair or disassemble device (especially
the baery). Doing so will void the warranty. The
baery in this device may present a risk of fire or
chemical burns if misused or tampered with.
• Use only supplied and manufacturer-approved chargers
and unplug this device when not in use for long periods
of me or during lightning storms.
FCC Statement
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon.
Note: The manufacturer is not responsible for ANY
interference, for example RADIO or TV
interference, caused by unauthorized modificaons
to this equipment. Such modificaons could void
the user's authority to operate the equipment.
EC Declaraon of Conformity
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon.
Note: The manufacturer is not responsible for ANY
interference, for example RADIO or TV
interference, caused by unauthorized modificaons
to this equipment. Such modificaons could void
the user's authority to operate the equipment. This
product is CE cerfied according to the provision of
the R&TTE Direcve (99/5/EC). This declares that
this product is in compliance with the essenal
requirements and other relevant provisions of
Direcve 1999/5/EC. Please note that this product
uses radio frequency bands not harmonized within
EU. Within the EU this product is intended for use
in Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Ireland, Italy, Luxembourg, the
Netherlands, Portugal, Spain, Sweden, and United
Kingdom and within EFTA in Iceland, Norway and
Switzerland.
Locaon of Controls
① Next Track / Volume +
② Power / Play / Pause / Answer
③ Indicator LED
④ Microphone
⑤ Previous Track / Volume –
⑥ Auxiliary Port
⑦ Charging Port
FrontBack
①
②
③
④
⑤
⑥
⑦
This device complies with Part of the FCC Rules
15

Vivitar VM175BT Specifications