VivoLink VL120007 - Introduction; Introduction to VL120007; Features; Package List

HDBaseT Extender Set 70m
1. Introduction
1.1 Introduction to VL120007
The extender set consists of a transmitter and receiver pair. HDMI signals are input into
the transmitter and HDBaseT technology is used to transmit the signals to the receiver
up to 70 m via a Cat5e/Cat6 cable. The receiver then outputs the HDMI signal.
Bi-directional IR is also transmitted across the Cat5e/Cat6 cable. The extender set
supports PoC, which can be used to power the receiver via the Cat5e/Cat6 cable. This
eliminates the need for power at the receiver end.
1.2 Features
 Supports full HD: Delivers high-resolution image (1080p 3D, 4Kx2K)
 Maximum transmission distance is 230 ft. (70 m) for 1080p and 131 ft. (40m) for
4Kx2K over single CAT5e/CAT6 cable
 High Bandwidth: 10.2Gps.
 HDTV Compatible, use HDMI 1.4 and HDCP compliant.
 Support PoC & CEC.
 Uses HDBaseT technology for extended capability and reliability
 Bi-directional IR control
 LED indicators show work status.
Note: Please use a CAT5e cable with low impedance (Shielded twisted pair will be
better and should be well grounded) for good transmission effect.
1.3 Package List
 1 x VL120007 (including TX and RX)
 4 x detachable mounting ears
 4 x screws
 8 x plastic cushions
 1 x power adapter (DC 12V 1A)
 1 x user manual
Notes: Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.
5