HDBaseT Extender Set 70m
2. Introduction of Product Appearance
2.1 Appearance of VL120007T
1) HDMI IN: Connect to HDMI source.
2) IR IN: Connect to an IR receiver, the IR signal received from this port can only send
out via VL120007R.
3) IR OUT: Connect with IR emitter, the sent IR signals are received by VL120007R.
4) Power Indicator: illuminate when power up
5) DC 12V: Connect with power supply, energize both VL120007T and VL120007R
(PoC solution) synchronously.
6) TP OUT: Connect to the TP IN socket on the VL120007R via CAT5e/ CAT6 cable.
To Next Page
Loading...
