VivoLink VL120021 - Receiver

HDBaseT 2.0 KVM Extender Set
3
⑤
USB OUT
Type-B USB port, connect to PC to receive remote USB
control
⑥
RS232
Serial port, connects with control device or device to be
controlled, supports bi-directional RS232 control.
⑦
DC 12V
Connect with a DC12V 2A power adapter.
 Pictures for reference only, subject to our existing products.
2.2 Receiver
No.
Name
Description
①
Indicators
Power:
 OFF: No power
 RED: DC power present
ON: Working status indicator
 OFF: Not operational
 Blinking GREEN: Normal operation
LINK: HDBT Link status indicator
 OFF: No Link
 GREEN: Link successful
 Blinking GREEN: Link problem
HDCP: HDCP compliant indicator
 OFF: No HDMI traffic(no picture)
 GREEN: HDMI signal with HDCP
 Blinking GREEN: HDMI signal without HDCP
DC 12V
Tx Rx
HDBT IN
HDMI OUT
USB IN
RS232
USB IN
Tx Rx
HDBT IN
HDMI OUT
RS232
FW
ON LINK HDCP
1
3
4
5
6
2
Front
Rear