8x8 HDMI 2.0 Matrix with Audio Matrix/ Downscaling/ AOC Supported
7
5. Panel Button Control
5.1 I/O Connection Switching
The front panel features eight input selection buttons and eight output selection buttons
for switching I/O connection.
1) To convert 1 input to 1 output:
Example: Input 1 to Output 3
→ Press INPUTS 1 + OUTPUTS 3 + ENTER button.
2) To convert 1 input to 2~7 outputs:
Example: Input 1 to Output 3, Output 6, Output 7.
→ Press INPUTS 1 + OUTPUTS 3, Output 6, Output 7 + ENTER button.
3) To convert 1 input to 8 outputs:
Example: Convert Input 2 to all outputs
→ Press INPUTS 2 + ALL button + ENTER button.
Note: Indicators of the pressed buttons will blink blue for three times if the conversion is
done, then it will be off. If the conversion failed, they will be off immediately.
5.2 I/O Connection Inquiry
Press OUTPUTS button 1, 2, 3, 4,5,6,7 or 8 to inquiry its corresponding input, and then
the indicator of the input button will turn blue.
5.3 LOCK Function
Long press the LOCK button for three seconds, all buttons on the front panel disable to
work. And then long press the LOCK button for three seconds again or unlock on GUI
control, the front panel button will unlock.
5.4 PRESET RECALL Function
Press and hold the PRESET 1~4 at least three seconds to save the current switching
status to the corresponding preset 1~4.
Press the PRESET 1~4 to recall the saved preset 1~4.
Note: The matrix switcher supports six presets, but only preset 1~4 can be saved and
recalled by button control. Please manage other preset by GUI control or RS232 control.
To Next Page
Loading...