VivoLink VLHDMIMAT8X8 - Query Commands

8x8 HDMI 2.0 Matrix with Audio Matrix/ Downscaling/ AOC Supported
23
8.3.3 Query Commands
Command
Function
Feedback Example
GetGuiIP.
Query GUI IP
GUI_IP:192.168.0.178!
SetGuiIP:xxx.x
xx.xxx.xxx.
Set GUI IP
SetGuiIP:192.168.0.178!
Baudratexxxx.
Set the baud rate of local serial port.
xxxx=115200, 57600, 38400,
19200,or 9600
Baudrate9600.
Set Local RS232 Baudrate
Is 9600!
STA.
Query Status
GUI Or RS232 Query
Status:
PTN
VLHDMIMAT8X8
V1.0.0
Power ON!
Front Panel UnLock!
Local RS232 Baudrate Is
115200!
GUI_IP:192.168.0.150!
… …
STA_POUT.
Query 5V Status of output port.
Turn ON Output 01!
Turn ON Output 02!
Turn ON Output 03!
Turn ON Output 04!
Turn ON Output 05!
Turn ON Output 06!
Turn ON Output 07!
Turn ON Output 08!
STA_IN.
Query 5V Status of input port.
IN 1 2 3 4 5 6
7 8
LINK Y Y Y N Y Y
Y Y
STA_OUT.
Query HPD Status of output.
OUT 1 2 3 4 5 6
7 8
LINK Y N Y Y Y Y
Y Y
STA_VIDEO.
Query the input source of output port.
Output 01 Switch To In 01!
Output 02 Switch To In 02!
Output 03 Switch To In 04!
Output 04 Switch To In 01!
Output 05 Switch To In 03!