VIVOTEK
124 - User's Manual
To remove a recording setting from the list, select a recording name from the drop-down list and click
Delete.
■ Click
recording (Name): Opens the Recording Settings page to modify.
■ Click
ON (Status): The Status will become OFF and stop recording.
■ Click NAS (Destination): Opens the le list of recordings as shown below. For more information about
folder naming rules, please refer to page 104 for details.
20170210
20170211
20170212
f you want to enable recording notification, please click
Event
to configure event triggering settings.
Please refer to Event > Event settings on page 97 for more details.
When completed, select Enable this recording. Click Save to enable the setting and click Close to exit
this page. When the system begins recording, it will send the recorded les to the network storage. The
new recording name will appear in the drop-down list on the recording page as shown below.
To Next Page
Loading...
