Vivotek CC8160 - Page 219

VIVOTEK
User's Manual - 219
focusmode auto,onetimeauto,spo
tlight,manual
<product dependent>
0/7 Focus mode selection:
"auto": Camera will automatically adjust the
focus position full time to adapt a clear picture.
"onetimeauto": Camera will automatically
adjust the focus position one time, which follows
any PTZ control.
"spotlight": Camera will automatically adjust
the focus position full time, and to consider a
spotlight avoidance situation.
"manual": Turn off the automatically focus
function. For user to control the focus position
manually as their purpose.
* We support this parameter when the version
number (httpversion) is equal or greater than
0304a.
Group: capability_ptz_c<0~(n-1)> n denotes the value of "capability_nvideoin"
(capability_ptzenabled > 0 and capability_camctrl_c<0~(n-1)>_zoommodule !=0)
* We support this group when the version number (httpversion) is equal or greater than 0303b.
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
panspeedlv 0, <positive integer> 0/7 The maximum speed level of pan motion.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is
"1"
minpan 0, <positive integer> 0/7 The lower limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is
"1"
maxpan 0, <positive integer> 0/7 The upper limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is
"1"
minpanangle <integer> 0/7 The lower limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is
"1"