VIVOTEK
46 - User's Manual
Rotate
MirrorNormal Flip Rotate 90°
clockwise
The camera may be installed on a vertical, side-facing, or tilted surface in order to accommodate the
interior or exterior design of a building or vehicle. The interior of a building can be shaped as a narrow
rectangular space, such as a corridor. The conventional HD image, such as that of a 16:9 aspect ratio,
will be incongruous with its wide horizontal view. With video rotation, the camera can more readily cover
the eld of view on a tall and narrow scene.
The rotation here indicates clockwise rotation.
Rotation can be applied with ip, mirror, and
physical lens rotation (see below) settings to
adapt to different mounting locations.
The gures in the illustration are shown in a
consecutive order.
Video orientation: Flip - vertically reflect the display of the live video; Mirror - horizontally reflect the
display of the live video. Select both options if the Network Camera is installed upside-down (e.g., on the
ceiling) to correct the image orientation. Please note that if you have preset locations, those locations will
be cleared after ip/mirror setting.
To Next Page
Loading...
