Vivotek FD8155 - Page 158

VIVOTEK
158 - User's Manual
7.12 Image setting for preview
Group: imagepreview_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5,100 100 4/4 Adjust brightness of image
according to mode settings.
saturation -5~5,100 100 4/4 Adjust saturation of image
according to mode settings.
100 for saturation percentage
mode.
contrast -5~5,100 100 4/4 Adjust contrast of image
according to mode settings.
sharpness -3~3,100 100 4/4 Adjust sharpness of image
according to mode settings.
brightnesspercent 0~100 0 4/4 Adjust brightnesspercent of
image
saturationpercent 0~100 50 4/4 Adjust saturation value of
percentage when
saturation=100
contrastpercent 0~100 50 4/4 Adjust contrastpercent of image
sharpnesspercent 0~100 50 4/4 Adjust sharpness value of
percentage when
sharpness=100
gammacurve 0~100 0 4/4 Gamma curve.
lowlightmode <boolean> 1 4/4 Enable/disable low light mode.
dnr_mode 0~1 1 4/4 0:disable
1:enable
dnr_strength 1~100 50 4/4 Strength of DNR
eis 0~1 0 4/4 Electronic image stabilizer
0:disable
1:enable
Group: imagepreview
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
videoin_whitebalance auto,
manual,
rbgain
auto 1/4 Preview of adjusting white balance of image
according to mode settings