Need help?Do you have a question about the Vivotek FD8131 and is the answer not in the manual?
Guides on setting up the camera using PoE-enabled or non-PoE switches.
Details on connecting the camera to the internet via a router.
Steps to access the camera through web browsers, including ActiveX settings.
Configuring basic system settings like host name and system time.
Options for setting and synchronizing the system time.
Instructions for upgrading the camera's firmware.
Restoring system settings to factory default.
Configuring measurement window and exposure level for ambient light.
Defining multiple streams, regions of interest, and output frame sizes.
Configuring video quality using constant bit rate or fixed quality.
Setting the network type (LAN, PPPoE) and IP address automatically or statically.
Enabling UPnP for network presentation and automatic port forwarding.
Steps to acquire the Network Camera's public IP address via PPPoE.
Utilizing HTTP authentication and setting HTTP ports.
Configuring RTSP streaming, including authentication and access names.
Enabling and configuring dynamic DNS service for fixed host and domain name.
Enabling SNMPv1, SNMPv2c, and SNMPv3 with security settings.
Setting the root password for administrator access.
Creating and managing multiple user accounts with different privileges.
Steps to create and install a certificate for secure HTTPS connection.
Procedure for generating a self-signed certificate for HTTPS.
Generating a certificate from a certification authority.
Enabling and configuring access list filtering (Allow/Deny types).
Steps to enable 802.1X authentication using EAP-PEAP or EAP-TLS.
Control settings for the camera's digital Pan/Tilt/Zoom (e-PTZ) operation.
Setting up events triggered by various sources like motion or digital input.
Details on trigger sources: motion detection, digital input, system boot, etc.
Configuring email server settings to send media files upon trigger.
Configuring FTP server settings to send media files upon trigger.
Steps to enable motion detection windows and configure sensitivity.
Creating and configuring profiles for motion detection scenarios.
Defining recording settings, source, schedule, and capacity.
Configuring adaptive recording and pre/post-event recording durations.
Setting up a NAS server for storing recorded video files.
Viewing SD card status and implementing cyclic storage or cleanup.
Setting search criteria to find and view recorded data.
Viewing search results and performing actions like view, download, or lock.
Parameters for network type, IP address, subnet, router, and DNS.
Settings for HTTP and HTTPS ports, authentication, and access names.
Parameters for RTSP streaming, including port, anonymous viewing, and access names.
Enabling IP filtering and defining allowed/denied IPv4 and IPv6 addresses.
Configuring video input parameters like CMOS frequency, white balance, gain, exposure.
Configuration for MPEG-4 and H.264 intra period, rate control, quant, bitrate.
Enabling motion detection and configuring windows, sensitivity, and profiles.
Enabling and configuring privacy mask windows.
Defining trigger conditions (boot, motion, etc.) and trigger status.
Guides on setting up the camera using PoE-enabled or non-PoE switches.
Details on connecting the camera to the internet via a router.
Steps to access the camera through web browsers, including ActiveX settings.
Configuring basic system settings like host name and system time.
Options for setting and synchronizing the system time.
Instructions for upgrading the camera's firmware.
Restoring system settings to factory default.
Configuring measurement window and exposure level for ambient light.
Defining multiple streams, regions of interest, and output frame sizes.
Configuring video quality using constant bit rate or fixed quality.
Setting the network type (LAN, PPPoE) and IP address automatically or statically.
Enabling UPnP for network presentation and automatic port forwarding.
Steps to acquire the Network Camera's public IP address via PPPoE.
Utilizing HTTP authentication and setting HTTP ports.
Configuring RTSP streaming, including authentication and access names.
Enabling and configuring dynamic DNS service for fixed host and domain name.
Enabling SNMPv1, SNMPv2c, and SNMPv3 with security settings.
Setting the root password for administrator access.
Creating and managing multiple user accounts with different privileges.
Steps to create and install a certificate for secure HTTPS connection.
Procedure for generating a self-signed certificate for HTTPS.
Generating a certificate from a certification authority.
Enabling and configuring access list filtering (Allow/Deny types).
Steps to enable 802.1X authentication using EAP-PEAP or EAP-TLS.
Control settings for the camera's digital Pan/Tilt/Zoom (e-PTZ) operation.
Setting up events triggered by various sources like motion or digital input.
Details on trigger sources: motion detection, digital input, system boot, etc.
Configuring email server settings to send media files upon trigger.
Configuring FTP server settings to send media files upon trigger.
Steps to enable motion detection windows and configure sensitivity.
Creating and configuring profiles for motion detection scenarios.
Defining recording settings, source, schedule, and capacity.
Configuring adaptive recording and pre/post-event recording durations.
Setting up a NAS server for storing recorded video files.
Viewing SD card status and implementing cyclic storage or cleanup.
Setting search criteria to find and view recorded data.
Viewing search results and performing actions like view, download, or lock.
Parameters for network type, IP address, subnet, router, and DNS.
Settings for HTTP and HTTPS ports, authentication, and access names.
Parameters for RTSP streaming, including port, anonymous viewing, and access names.
Enabling IP filtering and defining allowed/denied IPv4 and IPv6 addresses.
Configuring video input parameters like CMOS frequency, white balance, gain, exposure.
Configuration for MPEG-4 and H.264 intra period, rate control, quant, bitrate.
Enabling motion detection and configuring windows, sensitivity, and profiles.
Enabling and configuring privacy mask windows.
Defining trigger conditions (boot, motion, etc.) and trigger status.
General| Focal Length | 3.6 mm |
|---|---|
| Aperture | F2.0 |
| Pan/Tilt/Zoom Functionality | No |
| Video Compression | H.264, MJPEG |
| Multiple Video Streams | Yes |
| ONVIF | Yes |
| Power Supply | DC 12V |
| Lens | Fixed |
| Shutter Time | 1/5 sec to 1/30, 000 sec |
| Day/Night | Yes |
| Minimum Illumination | 0.5 Lux |
| Effective Range | 10m |
| Maximum Frame Rate | 30 fps |
| Network Interface | 10/100 Mbps Ethernet |
| Protocols | IPv4, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, SNMP, 802.1X |
| Security | Password protection, IP address filtering |
| Local Storage | MicroSD/SDHC card slot |
| Operating Temperature | -10°C to 50°C |
| Power over Ethernet | Yes (IEEE 802.3af) |
| Image Sensor | 1/3" Progressive Scan CMOS |
To Next Page
