Vivotek FD8131 - Security and Network Parameters; Security Parameter Definitions; Network Connection Type Parameters

VIVOTEK
124 - User's Manual
20
7.4 security
Group: security
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
privilege_camctrl view, operator,
admin
operator 6/6 Indicate which privileges and
above can control PTZ
(capability.ptzenabled > 0 or
capability.eptz > 0)
user_i0_name string[64] root 6/7 User name of root
user_i<1~20>_name string[64] <blank> 6/7 User name
user_i0_pass password[64] <blank> 6/6 Root password
user_i<1~20>_pass password[64] <blank> 7/6 User password
user_i0_privilege viewer,
operator,
admin
admin 6/7 Root privilege
user_i<1~20>_
privilege
viewer,
operator,
admin
<blank> 6/6 User privilege
7.5 network
Group: network
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
type lan,
pppoe
lan 6/6 Network connection type.
resetip <boolean> 1 6/6 1 => Get ipaddress, subnet, router,
dns1, dns2 from DHCP server at
next reboot.
0 => Use preset ipaddress, subnet,
rounter, dns1, and dns2.
ipaddress <ip address> <product
dependent>
6/6 IP address of server.
subnet <ip address> <blank> 6/6 Subnet mask.
router <ip address> <blank> 6/6 Default gateway.
dns1 <ip address> <blank> 6/6 Primary DNS server.