Vivotek FD8134 User Manual

Quick Installation Guide
English
繁中 日本語
Español Português
簡中
Français
Deutsch
Italiano
Türkçe
Polski
Русский
Česky Svenska
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T: +886-2-82455282|F: +886-2-82455532| E: sales@vivotek.com
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T: 408-773-8686| F: 408-773-8298| E: salesusa@vivotek.com
1MP • MicroSD/SDHC • Compact Design
All specications are subject to change without notice.
Copyright 2012 VIVOTEK INC. All rights reserved.
c
P/N:625011001G Rev. 1.1
FD8133/8134
Fixed Dome
Network Camera

Vivotek FD8134 Specifications

General

Minimum illumination	0.3 lx
Field of view (FOV) angle	56 °
Maximum resolution	1280 x 800 pixels
Video compression formats	H.264
Power over Ethernet (PoE)	Yes
Wi-Fi	No

Summary

Installation Warnings

General Safety Precautions

Key warnings include avoiding smoke, water, heat, direct sunlight, and humidity. Contact distributor for issues.

Handling and Installation Precautions

Avoid unsteady surfaces, lightning, disassembly, inserting objects, and dropping the camera.

Package Contents

Physical Description

Camera Components

Identifies key parts like lens, IR LEDs, card slot, ports, buttons, and LEDs.

Hardware Installation

Mounting the Camera

Instructions for ceiling or wall mounting, including drilling, anchors, and securing screws.

Network Deployment

General Connection (without PoE)

Connect camera to switch using coupler, connect to power, and use cross cable for direct PC connection.

Power over Ethernet (PoE)

Connect camera to PoE-enabled switch or use a PoE power injector with a non-PoE switch.

Assigning an IP Address

Ready to Use

Adjusting the Lens

3-axis Mechanism Design

Sophisticated 3-axis mechanism for flexible ceiling or wall installation.

Completion