Vivotek FD8131 - SNMP Configuration

VIVOTEK
User's Manual - 143
39
7.19 SNMP
Group: snmp (capability.snmp) (product dependent)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
v2 0~1 0 6/6 SNMP v2 enabled. 0 for
disable, 1 for enable
v3 0~1 0 6/6 SNMP v3 enabled. 0 for
disable, 1 for enable
secnamerw string[31] Private 6/6 Read/write security name
secnamero string[31] Public 6/6 Read only security name
authpwrw string[8~128] <blank> 6/6 Read/write authentication
password
authpwro string[8~128] <blank> 6/6 Read only authentication
password
authtyperw MD5,SHA MD5 6/6 Read/write authentication
type
authtypero MD5,SHA MD5 6/6 Read only authentication
type
encryptpwrw string[8~128] <blank> 6/6 Read/write passwrd
encryptpwro string[8~128] <blank> 6/6 Read only password
encrypttyperw DES <blank> 6/6 Read/write encryption
type
encrypttypero DES <blank> 6/6 Read only encryption type
rwcommunity string[31] Private 6/6 Read/write community
rocommunity string[31] Public 6/6 Ready only community
Group: snmp (capability.snmp) (product dependent, VS7101)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
versions 1 ~ 3 2 6/6 SNMP version to use.
rocomm string[14] public 6/6 V1, V2c Read only
community.
rwcomm string[14] private 6/6 V1, V2c Read write
community.