VIVOTEK
User's Manual - 93
PTZ > PTZ settings
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation.
The e-PTZ fucntion allows users to quickly move the focus to a target area for close-up viewing
without physically moving the camera. Please refer to below for detailed instruction.
Digital PTZ Operation (E-PTZ Operation)
■ Home location settings: If you are not displaying the full of what the camera can capture, such as
zooming in on a surveillance scene or currently displaying a crop of a scene, you can move to a view
and congure it as the home position.
Select Stream: Select stream #1 to set up the e-PTZ control. Please note that each stream can possess
its own preset and patrol settings. For detailed information about how to set up preset and patrol settings,
please refer to page 93.
To Next Page
Loading...
