Vivotek FD8166A-N - Page 164

VIVOTEK
164 - User's Manual
4: Detailed
5: Excellent
100: Use the quality level in
"qpercent"
99: Use the quality level in "qvalue"
* Only valid when
"ratecontrolmode"= vbr.
s<0~(m-1)>_h
264_qvalue
0~51 4/4 Manual video quality level input. The
Q value which is used by encoded
library directly.
* Only valid when
"ratecontrolmode"= vbr and
s<0~(m-1)>_h264_quant = 99.
s<0~(m-1)>_h
264_qpercent
1~100 4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality
* Only valid when
"ratecontrolmode"= vbr and
"quant"= 100.
s<0~(m-1)>_h
264_maxvbrbitr
ate
20000~"capability_videoin_c<n>_h2
64_maxbitrate
"
4/4
Themaximumallowedbitratein
fixedqualitymode.
Whenthebitrateexceedsthisvalue,
frameswillbedroppedtorestrict
thebitrate.

* Only valid when
"ratecontrolmode"= vbr
s<0~(m-1)>_h
264_cbr_quant
1~5, 100 4/4 Set the pre-defined quality level:
1: Medium
2: Standard
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"cbr_qpercent"