Vivotek FD8166A-N - Page 165

VIVOTEK
User's Manual - 165
* Only available when
"ratecontrolmode"= cbr.
* Only available when
"capability_smartstream_version"=2
.0
s<0~(m-1)>_h
264_cbr_qperce
nt
1~100 4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality
* Only valid when
"ratecontrolmode"= cbr and
"quant"= 100.
* Only available when
"capability_smartstream_version"=2
.0
s<0~(m-1)>_h
264_bitrate
20000~"capability_videoin_c<n>_h2
64_maxbitrate"
4/4 The target bit rate in constant bit rate
mode.
*Only valid when
"ratecontrolmode"= cbr

s<0~(m-1)>_h
264_prioritypoli
cy
framerate,imagequality 4/4 Set prioritypolicy
*Only valid when
"ratecontrolmode"= cbr

s<0~(m-1)>_h
264_maxframe
1~"capability_videoin_c<n>_h264_m
axframerate"
1/4 The maximum frame rates of a H264
stream at different
resolutions("capability_videoin_c0_r
esolution ") are recorded in
"capability_videoin_c<n>_h264_ma
xframerate"
s<0~(m-1)>_h
264_profile
0~2 1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
s<0~(m-1)>_h
265_dintraperio
d_enable
<boolean> 4/4 Enable "Dynamic intra frame period".
* Only available when
"capability_videoin_c<0~(n-1)>_di
ntraperiod_support" is 1 and h265 is
listed in "capability_videoin_codec".