Vivotek FD8166A-N - Page 172

VIVOTEK
172 - User's Manual
<product
dependent>
21~40: level 2
41~60: level 3
61~80: level 4
81~100: level 5
Level 1~4(low ~ high)
The higher sensitivity level meas that
it is easy to be trigger while scene
changed.
* Only available when
"capability_image_c<n>_aespeed"
is 1
flickerless
<product
dependent>
<boolean> 4/4 Turn on(1) or turn off(0) the
flickerless mode
* Only available when
"capability_image_c<n>_flickerless"
is 1
mounttype
<product
dependent>
ceiling, wall, floor 1/6 wall mount: 180° panoramic view
ceiling mount: 360° surround view
without blind spots
floor mount: 360° surround view
without blind spots
* Only available when
"capability_fisheye" > 0
enablewatermar
k
<product
dependent>
0, 1 1/6 0: Not to add watermarks on images
1: Add watermarks on images
* Only available when
"capability_fisheye" > 0
s<0~(m-2)>_fi
sheyedewarpmo
de
<product
dependent>
‘1O, 1P, 2P, 1R, 4R’ for ceiling/floor
mount
‘1O, 1P, 1R, 4R’ for wall mount
<product dependent>
1/4 Local dewarp mode.
“1O” is original mode (disable).
Supported dewarp mode is different
by mount type.
(videoin_c<n>_mounttype)
Supported mode list could be
extracted from
(capability_videoin_c<n>_localdewa
rp_typeceilingmount) and
(capability_videoin_c<n>_localdewa
rp_typewallmount)