Vivotek FD8166A-N - Page 173

VIVOTEK
User's Manual - 173
* Only available when
"capability_fisheyelocaldewarp_c<0
~(capability_nvideoin)-1>" > 0
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h264_smartstream2 (capability_smartstream_support=1 and
capability_smartstream_version=2.0)
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h265_smartstream2 (capability_smartstream_support=1,
capability_smartstream_version=2.0 and h265 is listed in "capability_videoin_codec")
n denotes the value of "capability_nvideoin",m denotes the value of " capability_nmediastream"
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 4/4 Enable or Disable smart codec
function
mode autotracking,manual,hybrid 4/4 Set Smart stream mode
"autotracking": only available
when
"capability_smartstream_mode_aut
otracking" is 1.
"manual": only available when
"capability_smartstream_mode_ma
nual" is 1.
"hybrid": only available when
"capability_smartstream_mode_hyb
rid" is 1.
qualitypriority -5,-4,-3,-2,-1,1,2,3,4,5 4/4 The differential value of Q between
the regions of interest (ROI) and the
areas of non-interest (non-ROI) of
the display image.
If the value is a positive number, the
video quality of ROI is better than the
non-ROI areas. The level is from 1 to
5. Level 5 is the maximum level of
the quality difference between the
ROI and non-ROI areas.
If the value is a negative number, the
video quality of non-ROI areas is
better than the ROI. The level is from