Vivotek FD8167-T - Page 256

VIVOTEK
256 - User's Manual
URL Command Document for All Series
31
URL commands for FD8367
7.10 IR cut control
Group: ircutcontrol
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
mode auto,
day,
night,
di,
schedule
auto 6/6 Set IR cut control mode
sir <boolean> 0 6/6 Enable/disable Smart IR
daymodebegintime 00:00~23:59 07:00 6/6 Day mode begin time
daymodeendtime 00:00~23:59 18:00 6/6 Day mod end time
disableirled <boolean> 0 6/6 Enable/disable built-in IR led
bwmode <boolean> 1 6/6 Switch to B/W in night mode if
enabled
sensitivity low,
normal,
high
normal 6/6 Sensitivity of light sensor
7.11 image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5 ~ 5 0 4/4 Adjust brightness of
image according to
mode settings.
saturation -5 ~ 5, 100 100 4/4 Adjust saturation of
image according to
mode settings.
saturationpercent 0~100 50 4/4 Adjust saturation
value of percentage
when saturation=100
contrast -5 ~ 5 0 4/4 Adjust contrast of image
according to mode
settings.