VIVOTEK
82 - User's Manual
URL command -- http://<ip address>:<http port>/<access name for stream 1, 2, or 3>
For example, when the Access name for stream 2 is set to video2.mjpg:
1. Launch Mozilla Firefox or Netscape.
2. Type the above URL command in the address bar. Press Enter.
3. The JPEG images will be displayed in your web browser.
NOTE
â–º Microsoft
®
Internet Explorer does not support server push technology; therefore, using http://<ip
address>:<http
port>/<access
name
for
stream
1,
2,
or
3>
will fail to access the Network Camera.
â–º Users can only use URL commands to request the stream 5. For more information about URL
commands, please refer to page 139.
RTSP Streaming
To utilize RTSP streaming authentication, make sure that you have set a password for controlling
the access to video stream îš¿rst. Please refer to Security > User account on page 91 for details.
http://192.168.5.151/video2.mjpg
NOTE:
To Next Page
Loading...
Need help?
General
