VIVOTEK
184 - User's Manual
<product
dependent>
<product dependent> mount type.
(videoin_c<0~(n-1)>_mounttype)
Supported mode list could be
extracted from
(capability_videoin_c<0~(n-1)>_local
dewarp_typeceilingmount) and
(capability_videoin_c<0~(n-1)>_local
dewarp_typewallmount)
* Only available when
"capability_fisheyelocaldewarp_c<0~(
capability_nvideoin)-1>" > 0
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h264_smartstream2 (capability_smartstream_support=1 and
capability_smartstream_version=2.0)
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h265_smartstream2 (capability_smartstream_support=1,
capability_smartstream_version=2.0 and h265 is listed in "capability_videoin_codec")
n denotes the value of "capability_nvideoin",m denotes the value of " capability_nmediastream"
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 4/4 Enable or Disable smart codec function
mode autotracking,manual,hybrid 4/4 Set Smart stream mode
"autotracking": only available when
"capability_smartstream_mode_autot
racking" is 1.
"manual": only available when
"capability_smartstream_mode_manu
al" is 1.
"hybrid": only available when
"capability_smartstream_mode_hybri
d" is 1.
qualitypriority -5,-4,-3,-2,-1,1,2,3,4,5 4/4 The differential value of Q between the
regions of interest (ROI) and the areas
of non-interest (non-ROI) of the
display image.
If the value is a positive number, the
video quality of ROI is better than the
non-ROI areas. The level is from 1 to
5. Level 5 is the maximum level of the
To Next Page
Loading...
