Vivotek FD8366-V - Page 263

VIVOTEK
User's Manual - 263
<product dependent>
exposure_rangetype onevalue,
twovalues
0/7 Support interface of exposure range.
"onevalue": The parameter is a
constant value.
"twovalues": Need two parameters
to indicate the exposure range.
* We support this parameter when the
version number (httpversion) is equal
or greater than 0302a.
exposure_shuttervaluetyp
e
fixed,
maximum,
-
0/7 * One to one mapping to the mode
type in "exposure_modetype".
"fixed": The shutter value is the
assigned value
(videoin_c<0~(n-1)>_shuttervalue).
"maximum": The shutter value can
be up to the assigned value
(videoin_c<0~(n-1)>_shuttervalue).
"-": not support.
* Only available when
"capability_image_c<0~(n-1)>_expo
sure_rangetype" is "onevalue".
* We support this parameter when the
version number (httpversion) is equal
or greater than 0302a.
exposure_gainvaluetype fixed,
maximum,
-
0/7 * One to one mapping to the mode
type in "exposure_modetype".
"fixed": The shutter value is the
assigned value
(videoin_c<0~(n-1)>_gainvalue).
"maximum": The shutter value can
be up to the assigned value
(videoin_c<0~(n-1)>_gainvalue)
"-": not support.
* Only available when
"capability_image_c<0~(n-1)>_expo
sure_rangetype" is "onevalue".
* We support this parameter when the