Vivotek FD836B-(E)HVF2 - Page 177

VIVOTEK
User's Manual - 177
"capability_smartstream_version"=2.
0
s<0~(m-1)>_m
jpeg_bitrate
20000~"capability_videoin_c<n>_mj
peg_maxbitrate"
4/4 The target bit rate in constant bit rate
mode.
* Only valid when "ratecontrolmode"=
cbr
s<0~(m-1)>_m
jpeg_prioritypoli
cy
framerate,imagequality 4/4 Set prioritypolicy
* Only valid when "ratecontrolmode"=
cbr
s<0~(m-1)>_m
jpeg_maxframe
1~"capability_videoin_c<n>_mjpeg_
maxframerate"
1/4 The maximum frame rates of a mjpeg
stream at different
resolutions("capability_videoin_c0_re
solution ") are recorded in
"capability_videoin_c<n>_mjpeg_ma
xframerate"
wdrpro_mode
<product
dependent>
<boolean> 4/4 Enable WDR pro
* Only available when
"capability_image_c<n>_wdrpro_mo
de" > 0
wdrpro_strengt
h
<product
dependent>
1~100 4/4 The strength of WDR Pro.
The bigger value means the stronger
strength of WDR Pro.
* Only available when
"capability_image_c<n>_wdrpro_stre
ngth" is 1
wdrc_mode
<product
dependent>
<boolean> 4/4 Enable WDR enhanced.
* Only available when
"capability_image_c<n>_wdrc_mode
" is 1
wdrc_strength
<product
dependent>
1~100 4/4 The strength of WDR enhanced.
The bigger value means the stronger
strength of WDR enhanced.
* Only available when
"capability_image_c<n>_wdrc_mode
" is 1
aespeed_mode
<product
<boolean> 4/4 Turning AE converge speed on or off.
0: off