Vivotek FD836B-(E)HVF2 - Page 179

VIVOTEK
User's Manual - 179
* Only available when
"capability_fisheye" > 0
enablewatermar
k
<product
dependent>
0, 1 1/6 0: Not to add watermarks on images
1: Add watermarks on images
* Only available when
"capability_fisheye" > 0
s<0~(m-2)>_fi
sheyedewarpmo
de
<product
dependent>
‘1O, 1P, 2P, 1R, 4R’ for ceiling/floor
mount
‘1O, 1P, 1R, 4R’ for wall mount
<product dependent>
1/4 Local dewarp mode.
“1O” is original mode (disable).
Supported dewarp mode is different by
mount type.
(videoin_c<n>_mounttype)
Supported mode list could be
extracted from
(capability_videoin_c<n>_localdewar
p_typeceilingmount) and
(capability_videoin_c<n>_localdewar
p_typewallmount)
* Only available when
"capability_fisheyelocaldewarp_c<0~(
capability_nvideoin)-1>" > 0
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h264_smartstream (capability_smartstream_support=1)
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h265_smartstream (capability_smartstream_support=1 and
h265 is listed in "capability_videoin_codec")
n denotes the value of "capability_nvideoin",m denotes the value of " capability_nmediastream"
NAME VALUE SECURITY
(get/set)
DESCRIPTION
mode autotracking,manual,hybrid 4/4 Set Smart stream mode
foreground_quant 0~5 4/4 Quality of foreground quality 0 =
worst quality, 5 = best quality.
background_quant 0~5 4/4 Quality of background quality 0 =
worst quality, 5 = best quality.
maxbitrate 20000~40000000 4/4 Maximum bitrate
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h264_smartstream_win_i<0~(k-1)>
(capability_smartstream_support=1 and capability_smartstream_mode_manual = 1)