Vivotek FD836B-(E)HVF2 - Page 266

VIVOTEK
266 - User's Manual
7.32 Storage management setting
Group: disk_i<0~(n-1)> n is the total number of storage devices. (capability.storage.dbenabled > 0)
Currently it’s only for local storage (SD, CF card), so n is equal to 1.
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
cyclic_enabled <boolean> 6/6 Enable cyclic storage method.
autocleanup_enabled
<Not recommended to use
this>
<boolean> 6/6 Enable automatic clean up method.
Expired and not locked media files will be
deleted.
* For forward compatibility reservations, but
only group disk_i0_autocleanup is effective.
* Not recommended to use this. Please refers
"autocleanup" group.
* This parameter will not be used after the
version number (httpversion) is equal or greater
than 0400a.
autocleanup_maxage
<Not recommended to use
this>
<positive integer> 6/6 To specify the expired days for automatic clean
up.
* For forward compatibility reservations, but
only group disk_i0_autocleanup is effective.
* Not recommended to use this. Please refers
"autocleanup" group.
* This parameter will not be used after the
version number (httpversion) is equal or greater
than 0400a.
Group: autocleanup (capability.localstorage.supportedge > 0)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
enabled <boolean> 6/6 Enable automatic clean up method.
Expired and not locked media files will be
deleted.
maxretentiontime_recordin
g_enabled
<boolean> 6/6 Enable automatic clean up method for video clip
generated by recording task.
The parameter takes effect when
autocleanup_enabled is enabled.