Vivotek FD9369 - Page 127

VIVOTEK
User's Manual - 127
Server type - HTTP
Select to send the media les to an HTTP server when a trigger is activated.
■ Server name: Enter a name for the server setting.
■ URL: Enter the URL of the HTTP server.
■ User name: Enter the user name if necessary.
■ Password: Enter the password if necessary.
To verify if the HTTP settings are correctly congured, click Test. The result will be shown in a pop-
up window as shown below. If successful, you will receive a test.txt le on the HTTP server.
Click Save server to enable the settings.