EasyManuals Logo

Vivotek FD9369 User Manual

Vivotek FD9369
427 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
VIVOTEK
78 - User's Manual
Media > Audio
Audio Settings
Mute: Select this option to disable audio transmission from the Network Camera to all clients.
Note that if mute mode is turned on, no audio data will be transmitted even if audio transmission is
enabled on the Client Settings page. In that case, the following message is displayed:
Internal microphone input gain: Select the gain of the internal audio input according to ambient
conditions. Adjust the gain from 0% (least) to 100% (most).
Audio type: Select audio codec as G.711 or G.726 and the bit rate.
G.711 provides good sound quality and requires about 64Kbps. Select pcmu (μ-Law) or pcma
(A-Law) mode.
■ G.726 is a speech codec standard covering voice transmission at rates of 16, 24, 32, and 40kbit/
s.
When completed with the settings on this page, click Save to enable the settings.

Other manuals for Vivotek FD9369

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vivotek FD9369 and is the answer not in the manual?

Vivotek FD9369 Specifications

General IconGeneral
TypeIP security camera
CertificationCE, FCC, ICES-003, RCM, VCCI, Safety, UL, CB, IA, BIS, IK10, IP66
Placement supportedIndoor & outdoor
Connectivity technologyWired
Wide Dynamic Range (WDR)Yes
Wi-Fi-
Number of users10 user(s)
Streaming methodMulticast
Networking standardsIEEE 802.3af
Ethernet interface typeFast Ethernet
Supported network protocols802.1X, ARP, Bonjour, CIFS/SMB, DDNS, DHCP, DNS, FTP, HTTP, HTTPS, ICMP, IGMPv3, IPv4, IPv6, NTP, PPPoE, QoS (CoS/DSCP), RTSP/RTP/RTCP, SMTP, SNMP, SSL, TCP/IP, TLS 1.2, UDP, UPnP
Flash memory256 MB
Compatible memory cardsSD, SDHC, SDXC
Ethernet LAN (RJ-45) ports1
Sensor typeCMOS
Optical sensor size1/3.1 \
DC output voltage12
Power source typeDC, PoE
Power consumption (max)6.49 W
Power consumption (typical)4 W
IK codeIK10
Form factorDome
Mounting typeCeiling
Product colorBlack, White
LED indicatorsPower, Status
International Protection (IP) codeIP66
Pan range0 - 350 °
Tilt angle range-10 - 75 °
Camera shutter speed1/5 - 1/32000 s
Minimum illumination0.08 lx
Operating temperature (T-T)-30 - 50 °C
Operating relative humidity (H-H)0 - 95 %
Audio system1-way
Audio formats supportedG.711, G.726
Signal-to-Noise Ratio (SNR)59 dB
Bit rate controlConstant Bit Rate (CBR)
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Video formats supportedH.264, H.265, M-JPEG
Image quality adjustmentBrightness, Saturation, Sharpness
LED typeIR
Night vision distance30 m
Windows operating systems supportedWindows 10, Windows 7, Windows 8
Digital zoom18 x
Focal length range2.8 mm
Weight and Dimensions IconWeight and Dimensions
Weight465 g
Diameter110 mm

Related product manuals