Vivotek FD9369 - Page 197

VIVOTEK
User's Manual - 197
© 2020 VIVOTEK INC. All Right Reserved
72
NAME VALUE SECURITY(
get/set)
DESCRIPTION
65_ratecontrol
mode
vbr: Fixed quality mode, all frames are
encoded in the same quality.
* Only available when h265 is listed in
"capability_videoin_codec".
s<0~(m-1)>_h2
65_quant
1~5,
99, 100
4/4 Set the pre-defined quality level:
1: Medium
2: Standard
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"qpercent"
99: Use the quality level in "qvalue"
* Only available when h265 is listed in
"capability_videoin_codec" .
* Only valid when
"h265_ratecontrolmode"= vbr
s<0~(m-1)>_h2
65_qvalue
0~51 4/4 Manual video quality level input. The
Q value which is used by encoded
library directly.
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when
"h265_ratecontrolmode"= vbr and
s<0~(m-1)>_h265_quant = 99.
s<0~(m-1)>_h2
65_qpercent
1~100 4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when
"h265_ratecontrolmode"= vbr and
"quant"= 100.
s<0~(m-1)>_h2
65_maxvbrbitr
20000~"capability_videoin
_c<0~(n-1)>_h265_maxbit
4/4 The maximum allowed bit rate in fixed
quality mode.
© 2020 VIVOTEK INC. All Right Reserved
73
NAME VALUE SECURITY(
get/set)
DESCRIPTION
ate rate" When the bit rate exceeds this value,
frames will be dropped to restrict the
bit rate.
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when
"h265_ratecontrolmode"= vbr
s<0~(m-1)>_h2
65_cbr_quant
1~5, 100 4/4 Set the pre-defined quality level:
1: Medium
2: Standard
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"cbr_qpercent"
* Only available when h265 is listed in
"capability_videoin_codec" and
"h265_ratecontrolmode"= cbr.
s<0~(m-1)>_h2
65_cbr_qperce
nt
1~100 4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when
"h265_ratecontrolmode"= cbr and
"quant"= 100.
s<0~(m-1)>_h2
65_bitrate
20000~"capability_videoin
_c<0~(n-1)>_h265_maxbit
rate"
4/4 The target bit rate in constant bit rate
mode.
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when
"h265_ratecontrolmode"= cbr
s<0~(m-1)>_h2 framerate,imagequality 4/4 Set prioritypolicy