Vivotek FD9369 - Page 214

VIVOTEK
214 - User's Manual
© 2020 VIVOTEK INC. All Right Reserved
90
ttl 1 ~ 255 4/4 Multicast video time to live value.
7.9 Time Shift Settings
Group: timeshift for n channel products and m stream
n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream"
(capability_timeshift > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable
<Not
recommended
to use>
<boolean> 4/4 Enable time shift streaming.
* We replace this parameter with "
timeshift_c<0~(n-1)>_enable"
when the version number
(httpversion) is equal or greater than
0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
c<0~(n-1)>_en
able
<boolean> 4/4 Enable time shift streaming.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
c<0~(n-1)>_s<
0~(m-1)>_allo
w
<boolean> 4/4 Enable time shift streaming for
specific stream.
7.10 IR Cut Control
<Not recommended to use this>
Group: ircutcontrol (capability_nvideoinprofile> 0 and capability_daynight_c<0~(n-1)>_support > 0)
n denotes the value of "capability_nvideoin"
* We do not support these parameters when "capability_nvideoin > 1"
NAME VALUE SECURITY
(get/set)
DESCRIPTION
mode auto, 6/6 Set IR cut control mode