VIVOTEK
User's Manual - 249
© 2020 VIVOTEK INC. All Right Reserved
124
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable or disable the dynamic DNS.
provider DyndnsDynamic,
DyndnsCustom,
Safe100
6/6 DyndnsDynamic => dyndns.org
(dynamic)
DyndnsCustom => dyndns.org
Safe100 => safe100.net
<provider>_hostnam
e
string[128] 6/6 Your DDNS hostname.
<provider>_usernam
eemail
string[64] 6/6 Your user name or email to login to
the DDNS service provider
<provider>_passwor
dkey
string[64] 7/6 Your password or key to login to the
DDNS service provider.
7.19 Express Link
Group: expresslink
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable or disable express link.
state onlycheck,
onlyoffline,
checkonline,
badnetwork
6/6 Camera will check the status of
environment and express link URL
url string[64] 6/6 The url user define to link to camera
7.20 UPnP Presentation
Group: upnppresentation
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable or disable the UPnP
presentation service.
7.21 UPnP Port Forwarding
Group: upnpportforwarding
© 2020 VIVOTEK INC. All Right Reserved
125
NAME VALUE
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable or disable the UPnP port
forwarding service.
upnpnatstatus 0~3 6/7 The status of UPnP port forwarding,
used internally.
0 = OK, 1 = FAIL, 2 = no IGD router, 3 =
no need for port forwarding
7.22 System Log
Group: syslog
NAME VALUE
(get/set)
DESCRIPTION
enableremotelog <boolean> 6/6 Enable remote log.
serverip <IP address> 6/6 Log server IP address.
serverport 514, 1025~65535
6/6 Server port used for log.
level 0~7 6/6 Levels used to distinguish the
importance of the information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
setparamlevel 0~2 6/6 Show log of parameter setting.
0: disable
1: Show log of parameter setting set
from external.
2. Show log of parameter setting set
from external and internal.
7.23 SNMP
Group: snmp (capability_protocol_snmp > 0)
To Next Page
Loading...
