Vivotek FD9369 - Page 281

VIVOTEK
User's Manual - 281
© 2020 VIVOTEK INC. All Right Reserved
156
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
maxtilt 0, <positive integer>
0/7 The upper limit for tilt position.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildin
pt" is "1"
mintiltangle <integer> 0/7 The lower limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildin
pt" is "1"
maxtiltangle <integer> 0/7 The upper limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildin
pt" is "1"
zoomspeedlv 0, <positive integer>
0/7 The maximum speed level of zoom
motion.
*Only available when the value of
"capability_camctrl_c<0~(n-1)>_zoomm
odule" is "1"
minzoom 0, <positive integer>
0/7 The lower limit for zoom position.
*Only available when the value of
"capability_camctrl_c<0~(n-1)>_zoomm
odule" is "1"
maxzoom 0, <positive integer>
0/7 The upper limit for zoom position.
*Only available when the value of
"capability_camctrl_c<0~(n-1)>_zoomm
odule" is "1"
maxdzoom 0, <positive integer>
0/7 The upper limit for digital zoom
position.
*Only available when the value of
"capability_camctrl_c<0~(n-1)>_zoomm
odule" is "1"
focusspeedlv 0, <positive integer>
0/7 The maximum speed level of focus
motion.
*Only available when the value of
"capability_camctrl_c<0~(n-1)>_zoomm
odule" is "1"
© 2020 VIVOTEK INC. All Right Reserved
157
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
minfocus 0, <positive integer> 0/7 The lower limit for focus position.
*Only available when the value of
"capability_camctrl_c<0~(n-1)>_zoomm
odule" is "1"
maxfocus 0, <positive integer> 0/7 The upper limit for focus position.
*Only available when the value of
"capability_camctrl_c<0~(n-1)>_zoomm
odule" is "1"
7.27.3 Capability for IR Led
Group: capability_daynight_c<0~(n-1)> n denotes the value of "capability_nvideoin"
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
support <boolean> 0/7 Indicate whether the camera supports
day/night mode switch
builtinir <boolean> 0/7 Indicate whether to support built-in IR
led.
* We replaced this parameter with
“capability_daynight_illuminators_builti
n_support” when the version number
(httpversion) is equal or greater than
0312a.
builtinwled <boolean> 0/7 Indicate whether to support built-in
white led.
* We replaced this parameter with
“capability_daynight_illuminators_builti
n_type=whiteled” when the version
number
(httpversion) is equal or greater
than 0312a.